Přejít k hlavnímu obsahu

 Jak vybrat sloupec na základě záhlaví sloupce v aplikaci Excel?

Předpokládejme, že máte velký list, který obsahuje více sloupců, a nyní byste chtěli vybrat konkrétní sloupec na základě názvu záhlaví sloupce. Chcete-li najít sloupec po sloupci ve velkém listu, ztratíte mnoho času, v tomto článku představím rychlou metodu řešení této úlohy v aplikaci Excel.

Vyberte sloupec na základě názvu záhlaví sloupce s kódem VBA


Vyberte sloupec na základě názvu záhlaví sloupce s kódem VBA

Následující kód VBA vám pomůže vybrat sloupce na základě konkrétního názvu záhlaví, udělejte to takto:

1. Podržte ALT + F11 klávesy pro otevření Microsoft Visual Basic pro aplikace okno.

2, klikněte Vložit > Modula vložte následující kód do Modul Okno.

Kód VBA: Vyberte sloupec na základě názvu záhlaví sloupce:

Sub FindAddressColumn()
'Updateby Extendoffcie
    Dim xRg As Range
    Dim xRgUni As Range
    Dim xFirstAddress As String
    Dim xStr As String
    On Error Resume Next
    xStr = "Name"
    Set xRg = Range("A1:P1").Find(xStr, , xlValues, xlWhole, , , True)
    If Not xRg Is Nothing Then
        xFirstAddress = xRg.Address
        Do
            Set xRg = Range("A1:P1").FindNext(xRg)
            If xRgUni Is Nothing Then
                Set xRgUni = xRg
            Else
                Set xRgUni = Application.Union(xRgUni, xRg)
            End If
        Loop While (Not xRg Is Nothing) And (xRg.Address <> xFirstAddress)
    End If
    xRgUni.EntireColumn.Select
End Sub

Poznámka: Ve výše uvedeném kódu, A1: P1 je rozsah záhlaví, ze kterých chcete vybrat sloupce, a „Příjmení“Ve scénáři xStr = "Jméno" je název záhlaví, podle kterého chcete vybrat sloupce. Změňte je prosím podle svých potřeb.

3. Po zkopírování a vložení kódu stiskněte F5 klíč ke spuštění tohoto kódu a všechny sloupce se specifickým názvem záhlaví byly vybrány najednou, viz screenshot:

Nejlepší nástroje pro produktivitu v kanceláři

🤖 Kutools AI asistent: Revoluční analýza dat založená na: Inteligentní provedení   |  Generovat kód  |  Vytvořte vlastní vzorce  |  Analyzujte data a generujte grafy  |  Vyvolejte funkce Kutools...
Populární funkce: Najít, zvýraznit nebo identifikovat duplikáty   |  Odstranit prázdné řádky   |  Kombinujte sloupce nebo buňky bez ztráty dat   |   Kolo bez vzorce ...
Super vyhledávání: Více kritérií VLookup    VLookup s více hodnotami  |   VLookup na více listech   |   Fuzzy vyhledávání ....
Pokročilý rozevírací seznam: Rychle vytvořte rozevírací seznam   |  Závislý rozbalovací seznam   |  Vícenásobný výběr rozevíracího seznamu ....
Správce sloupců: Přidejte konkrétní počet sloupců  |  Přesunout sloupce  |  Přepnout stav viditelnosti skrytých sloupců  |  Porovnejte rozsahy a sloupce ...
Doporučené funkce: Zaměření mřížky   |  Návrhové zobrazení   |   Velký Formula Bar    Správce sešitů a listů   |  Knihovna zdrojů (Automatický text)   |  Výběr data   |  Zkombinujte pracovní listy   |  Šifrovat/dešifrovat buňky    Odesílat e-maily podle seznamu   |  Super filtr   |   Speciální filtr (filtr tučné/kurzíva/přeškrtnuté...) ...
Top 15 sad nástrojů12 Text Tools (doplnit text, Odebrat znaky, ...)   |   50+ Graf Typ nemovitosti (Ganttův diagram, ...)   |   40+ Praktické Vzorce (Vypočítejte věk na základě narozenin, ...)   |   19 Vložení Tools (Vložte QR kód, Vložit obrázek z cesty, ...)   |   12 Konverze Tools (Čísla na slova, Přepočet měny, ...)   |   7 Sloučit a rozdělit Tools (Pokročilé kombinování řádků, Rozdělit buňky, ...)   |   ... a více

Rozšiřte své dovednosti Excel pomocí Kutools pro Excel a zažijte efektivitu jako nikdy předtím. Kutools for Excel nabízí více než 300 pokročilých funkcí pro zvýšení produktivity a úsporu času.  Kliknutím sem získáte funkci, kterou nejvíce potřebujete...

Popis


Office Tab přináší do Office rozhraní s kartami a usnadňuje vám práci

  • Povolte úpravy a čtení na kartách ve Wordu, Excelu, PowerPointu, Publisher, Access, Visio a Project.
  • Otevřete a vytvořte více dokumentů na nových kartách ve stejném okně, nikoli v nových oknech.
  • Zvyšuje vaši produktivitu o 50%a snižuje stovky kliknutí myší každý den!
Comments (8)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Good job, works great!
This comment was minimized by the moderator on the site
Hi everyone...

How can I make it so that only the column data is selected, without the header, instead of the entire column?

Thanks
This comment was minimized by the moderator on the site
Thank you spo much saved my day !
This comment was minimized by the moderator on the site
Thanks - at first it seemed to work, but then I noticed it didn't include the first-found column - it started with the second and on.

Which is explainable: you set xRg twice, but you do not include the first one.

TBH: initially I thought it worked fine, but then that 'error' showed up and I had to figure out why....

I fixed it as follows: (in Excel the comments will turn green and show my edits: '***)

<code>

Sub FindAddressColumn()

'Updateby Extendoffcie

Dim xRg As Range

Dim xRgUni As Range

Dim xFirstAddress As String

Dim xStr As String

On Error Resume Next
xStr = "Name"
Set xRg = Range("A1:P1").Find(xStr, , xlValues, xlPart, , , True)

If Not xRg Is Nothing Then

xFirstAddress = xRg.Address

Do

If xRgUni Is Nothing Then

Set xRgUni = Range(xFirstAddress) '*** Using the first-found range

Else

Set xRgUni = Application.Union(xRgUni, xRg)

End If



Set xRg = Range("A1:P1").FindNext(xRg) '*** Now searching for the second/next ones



Loop While (Not xRg Is Nothing) And (xRg.Address <> xFirstAddress)

End If

xRgUni.EntireColumn.Select

End Sub


</code>

This now works for me, but I hope to learn from you if I overlooked anything.
This comment was minimized by the moderator on the site
Hi, Can you suggest the macro for the issue mentioned below by Shaun
This comment was minimized by the moderator on the site
Hi, looks great work. But I am getting the compile error: Argument not optional while highlighting the ". Union". What should I do?
This comment was minimized by the moderator on the site
This is great, but what if I wanted to copy say, CustomerName, OrderNumber, OrderDate, FulfillmentDate, OrderStatus from Sheet1 with many more columns.
How do I only specify the columns that are needed to be copied to another sheet? This seems to only specify one column.
I have tried some things, but the problem is more where the columns are not necesarily in the same order on the source sheet. The source data in Sheet1 is pasted from the Windows clipboard to the Excel sheet.

It may be, CustomerName, OrderDate, OrderNumber, OrderStatusm FulfillmentDate or some other order.

I need them to be copied into a new sheet in a specific order as there are formulas in Sheet2 that are applied to what is copied from Sheet1 to Sheet2.

Other than shifting columns around after pasting from Windows clipboard, I can't figure this out.

Please help if possible.

Thank you kindly for the above though.
This comment was minimized by the moderator on the site
Dim xRg As Range
Dim xRgUni As Range
Dim xFirstAddress As String
Dim xStr As String

Are variables being declared.

Hence to use the above code again for another column you would have to declare new variables.

Dim xRg2 As Range
Dim xRgUni2 As Range
Dim xFirstAddress2 As String
Dim xStr2 As String

And replace every instance of xRg with xRg2 in the code ect. Does that make sense?
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations