Přejít k hlavnímu obsahu

Jak dvakrát kliknout na buňku a otevřít určený list v aplikaci Excel?

Chcete rychle přejít na zadaný list v sešitu aplikace Excel? Tento článek poskytne metodu VBA k otevření zadaného listu poklepáním na určitou buňku v aplikaci Excel.

Poklepáním na buňku otevřete zadaný list s kódem VBA


Poklepáním na buňku otevřete zadaný list s kódem VBA

Chcete-li otevřít určený list dvojitým kliknutím na buňku v aplikaci Excel, postupujte takto.

1. Klepněte pravým tlačítkem myši na kartu listu, která obsahuje buňku, kterou chcete otevřít, kliknutím na ni. A pak klikněte Zobrazit kód z kontextové nabídky. Viz snímek obrazovky:

2. V otvoru Microsoft Visual Basic pro aplikace zkopírujte následující kód VBA do okna Kód.

Kód VBA: dvojitým kliknutím na buňku otevřete určený list v aplikaci Excel

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
'Updated by Extendoffice 20180822
Dim xArray, xAValue As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A1;Sheet2", "A12;Sheet3", "A4;Sheet4", "A100;Sheet5")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetName = ""
xStrSheetName = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub

Poznámka: V kódu VBA „A1;List2""A12;List3""A4;List4""A100;List5“ znamená, že dvojitým kliknutím na buňku A1 otevřete List2, dvojitým kliknutím na A2 otevřete List3..., změňte je podle svých potřeb.

3. zmáčkni Další + Q klávesy společně zavřete Microsoft Visual Basic pro aplikace okno.

Od nynějška, když dvakrát kliknete na buňku A1 v aktuálním listu, zadaný list se okamžitě aktivuje.


Související články:

Nejlepší nástroje pro produktivitu v kanceláři

🤖 Kutools AI asistent: Revoluční analýza dat založená na: Inteligentní provedení   |  Generovat kód  |  Vytvořte vlastní vzorce  |  Analyzujte data a generujte grafy  |  Vyvolejte funkce Kutools...
Populární funkce: Najít, zvýraznit nebo identifikovat duplikáty   |  Odstranit prázdné řádky   |  Kombinujte sloupce nebo buňky bez ztráty dat   |   Kolo bez vzorce ...
Super vyhledávání: Více kritérií VLookup    VLookup s více hodnotami  |   VLookup na více listech   |   Fuzzy vyhledávání ....
Pokročilý rozevírací seznam: Rychle vytvořte rozevírací seznam   |  Závislý rozbalovací seznam   |  Vícenásobný výběr rozevíracího seznamu ....
Správce sloupců: Přidejte konkrétní počet sloupců  |  Přesunout sloupce  |  Přepnout stav viditelnosti skrytých sloupců  |  Porovnejte rozsahy a sloupce ...
Doporučené funkce: Zaměření mřížky   |  Návrhové zobrazení   |   Velký Formula Bar    Správce sešitů a listů   |  Knihovna zdrojů (Automatický text)   |  Výběr data   |  Zkombinujte pracovní listy   |  Šifrovat/dešifrovat buňky    Odesílat e-maily podle seznamu   |  Super filtr   |   Speciální filtr (filtr tučné/kurzíva/přeškrtnuté...) ...
Top 15 sad nástrojů12 Text Tools (doplnit text, Odebrat znaky, ...)   |   50+ Graf Typ nemovitosti (Ganttův diagram, ...)   |   40+ Praktické Vzorce (Vypočítejte věk na základě narozenin, ...)   |   19 Vložení Tools (Vložte QR kód, Vložit obrázek z cesty, ...)   |   12 Konverze Tools (Čísla na slova, Přepočet měny, ...)   |   7 Sloučit a rozdělit Tools (Pokročilé kombinování řádků, Rozdělit buňky, ...)   |   ... a více

Rozšiřte své dovednosti Excel pomocí Kutools pro Excel a zažijte efektivitu jako nikdy předtím. Kutools for Excel nabízí více než 300 pokročilých funkcí pro zvýšení produktivity a úsporu času.  Kliknutím sem získáte funkci, kterou nejvíce potřebujete...

Popis


Office Tab přináší do Office rozhraní s kartami a usnadňuje vám práci

  • Povolte úpravy a čtení na kartách ve Wordu, Excelu, PowerPointu, Publisher, Access, Visio a Project.
  • Otevřete a vytvořte více dokumentů na nových kartách ve stejném okně, nikoli v nových oknech.
  • Zvyšuje vaši produktivitu o 50%a snižuje stovky kliknutí myší každý den!
Comments (14)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Can't get the code to open the other worksheet
This comment was minimized by the moderator on the site
Hi Will,Is there any prompts while using the code?
This comment was minimized by the moderator on the site
Can't get code to open the other sheet, can some help
This comment was minimized by the moderator on the site
hi!
It cannot accept the code for more than 59 sheets.
What code do i need to use to insert more sheets.
When it change the line the code doesnt work.
Help!
This comment was minimized by the moderator on the site
Hi Crystal

I have copied the code and edited according to the name of the worksheets. The code is running but I still cannot open the sheets, what have I done wrong?

Sub OpenbyDoubleclicking(ByVal Target As Range, Cancel As Boolean)

Dim xArray, xAvlaue As Variant '
Dim xFSum As Long
Dim xStr, xStrRg, xStrSheetname As String
xRgArray = Array("A3;FTIR", "A4;Viscometer")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetname = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then _
Sheets(xStrSheetname).Active
End If
Next
End Sub


Many thanks
This comment was minimized by the moderator on the site
Hi Carl,
In your code, please replace the first line with "Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)".
Thank you for your comment. The entire code should be as follows.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xArray, xAValue As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A3;FTIR", "A4;Viscometer")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetName = ""
xStrSheetName = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub
This comment was minimized by the moderator on the site
Hi how can i extend my array? it stucks already and i cannot add more of this because it limits to col 1024 only for that line. pls help

xRgArray = Array("A2;Sheet2", "A3;Sheet3", "A4;Sheet4", "A5;Sheet5")
This comment was minimized by the moderator on the site
Hi Neil,
The code works well in my case even extended my array to Array = Array("A2;Sheet2", "A3;Sheet3", "A4;Sheet4", "A5;Sheet5", "A6;Sheet6").
Can you tell me your Excel version?
This comment was minimized by the moderator on the site
After you get to the desired sheet. Is there a way to copy information from a cell in that sheet and automatically go back to the cell I double clicked on originally in the first sheet?
This comment was minimized by the moderator on the site
Hi James
You need to manually click the original worksheet tab to back to it. Sorry can't take this into consideration.
This comment was minimized by the moderator on the site
Is there a way to do multiple codes for one tab? such as clicking on another cell to jump into another worksheet.

How would that code look like?
This comment was minimized by the moderator on the site
Good day,

The below VBA code can help you to solve the problem. Thanks for your comment.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xArray As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A2;Sheet2", "A3;Sheet3", "A4;Sheet4", "A5;Sheet5")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xStrRg = ""
xStrRg = Left(xStr, 2)
xStrSheetName = ""
xStrSheetName = Right(xStr, Len(xStr) - 3)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub
This comment was minimized by the moderator on the site
Hi, In the line that states xStrRg = Left(xStr, 2), this picks up the cell if its a single number cell i.e. A1, A2, A3. but not if its A11, or A111. how do i write the code to allow me to use cells A1, A11, and A111?

Hope this makes sense, i'm not particularly technical!!
This comment was minimized by the moderator on the site
Good Day,
The code has been optimized again. Please have a try and thanks for your comment.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xArray, xAValue As Variant
Dim xFNum As Long
Dim xStr, xStrRg, xStrSheetName As String
xRgArray = Array("A1;Sheet2", "A12;Sheet3", "A4;Sheet4", "A100;Sheet5")
On Error Resume Next
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStr = ""
xStr = xRgArray(xFNum)
xAValue = ""
xAValue = Split(xStr, ";")
xStrRg = ""
xStrRg = xAValue(0)
xStrSheetName = ""
xStrSheetName = xAValue(1)
If Not Intersect(Target, Range(xStrRg)) Is Nothing Then
Sheets(xStrSheetName).Activate
End If
Next
End Sub
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations