Přejít k hlavnímu obsahu

Snadné čtení / prohlížení velkého počtu řádků a sloupců v aplikaci Excel

Pokud pracujete na tom, že list obsahuje obrovská data se stovkami řádků a sloupců, může se vám při kontrole a přeskakování dat z jednoho na druhý snadno rýsovat hádanka, což ztrácí čas. Pro vyřešení tohoto problému nástroj Grid Focus Kutools pro Excel zvýrazní přes řádek a sloupec, aby byla aktivní buňka nebo rozsah vynikající, jak je znázorněno na obrázku níže. Demonstrace

rozložení pro čtení snímků 2


Povolte nástroj Grid Focus

klikněte Kutools > Zaměření mřížky Chcete-li povolit tento nástroj, je karta zvýrazněna, když je povoleno Zaměření mřížky.
rozložení pro čtení snímků 2


Nastavení ostření mřížky

Chcete-li změnit nastavení, jako jsou tvary, styly, barvy nebo průhlednost, přejděte na ikonu Nastavení zaostření mřížkys dialogové okno pro změnu.

klikněte Kutools kartu a klikněte na šipku vedle Zaměření mřížky rozbalte rozevírací nabídku a klikněte na Nastavení zaměření mřížky.
rozložení pro čtení snímků 2

v Nastavení zaměření mřížky V dialogovém okně můžete podle potřeby měnit tvary, styly, barvy a průhlednost, zároveň si můžete prohlédnout náhled změny Náhled před provedením změn.
rozložení pro čtení snímků 2

O Nás Zvýrazněte oblast aktivní buňky a Zvýrazněte oblast při úpravách buňky možnosti.

Klíště Zvýrazněte oblast aktivní buňky Tato možnost zvýrazní aktivní buňku nebo rozsah.

rozložení pro čtení snímků 2

Odpojit Zvýrazněte oblast aktivní buňky možnost, ale zaškrtněte Zvýrazněte oblast při úpravách buňky Možnost, aktivní buňka nebo oblast nebude zvýrazněna, ale bude zvýrazněna přetékající oblast.

rozložení pro čtení snímků 2

Zrušte zaškrtnutí obou Zvýrazněte oblast aktivní buňky a Zvýrazněte oblast při úpravách buňky možnosti, aktivní buňka nebo rozsah a přetékající oblast nebudou zvýrazněny.

rozložení pro čtení snímků 2

Povolit zaměření mřížky: po nastavení zaškrtněte tuto možnost a klikněte OK, Zaostření mřížky se automaticky aktivuje.

Výchozí nastavení: klikněte na toto tlačítko, nastavení Grid Focus bylo obnoveno na výchozí nastavení Kutools.


Poznámky:

1. Tento nástroj můžete zrušit kliknutím na Zaměření mřížky příkaz se karta změní na světle šedou.

2. Pokud otevřete více souborů aplikace Excel, toto Zaměření mřížky funkce je aplikována na všechny z nich.

3. To Zaměření mřížky nebude povoleno automaticky při příštím spuštění sešitu.

Ukázka zaměření mřížky


Kutools pro Excel: Více než 300 užitečných nástrojů na dosah ruky! Začněte svou 30denní bezplatnou zkušební verzi bez omezení funkcí ještě dnes. Stáhnout nyní!

    Doporučujeme nástroje produktivity
    Následující nástroje vám mohou výrazně ušetřit čas a peníze, který je pro vás ten pravý?
    Karta Office: Používání praktických karet ve vaší kanceláři, jako způsob Chrome, Firefox a New Internet Explorer.
    Kutools pro Excel: Více než 300 pokročilých funkcí pro Excel 2021, 2019, 2016, 2013, 2010, 2007 a Office 365.

    Kutools pro Excel

    Výše popsaná funkce je pouze jednou z 300 výkonných funkcí Kutools pro Excel.

    Navrženo pro Excel(Office) 2021, 2019, 2016, 2013, 2010, 2007 a Office 365. Bezplatné stažení a používání po dobu 30 dnů.

    Snímek obrazovky Kutools pro Excel

    btn číst více      stáhnutí btn     btn nákup

Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Why doesn't it open automatically at startup? it would be nice to remember the last setting
This comment was minimized by the moderator on the site
Hello, Mennan,
Sorry for the inconvenience, for the stability of the function, our feature is disabled when opening next time at present, but the last setting and operation can be remembered.
Thanks for your comment.
This comment was minimized by the moderator on the site
I have a problem with the reading layout. Every time when I start it, it behaves strangely. It "chose" a smaller size of the sheet than it is actually on my screen and it works in that sheet. Eg: if I see on my screen columns range from A up to AC and rows range from 1 up to 39, the reading layout chooses that my columns range from A up to half of X and rows range from 1 up to half of 32 and works in that let's call it window.
I tried to uninstall kutools and install it again, but the same problem remains.
Any wise advice would be appreciated from my side.
I am running MS office professional plus 2021.

Thanks in advance
This comment was minimized by the moderator on the site
I might detected the problem. I am running 3 displays, one from a laptop 15,6" and two others 24" over wavlink dock. All three displays are running at a resolution of 1920 x 1080. My main display is from the laptop.
I am using excel on another two 24" displays just because they have a bigger screen. When I put excel on the laptop window reading layout behaves as it should, and that is the exact size of the sheet that I previously described as a smaller window.
This comment was minimized by the moderator on the site
Hello, Dejan,
Thanks for your comment.
I have fed back this problem to the developers, if there is a an upgrade or fixed, we will let you know in the first time.
This comment was minimized by the moderator on the site
If you make this auto load when opening excel I will buy this product. :D
This comment was minimized by the moderator on the site
Hi, Andrei

Thanks for your comment, your suggestion has been fed back to the developers, if there's an upgrade, I'll let you know in the first time. 😄
This comment was minimized by the moderator on the site
Very Good Service Nice blog
This comment was minimized by the moderator on the site
Hello, Thanks for sharing this informative blog with us.
This comment was minimized by the moderator on the site
This feature is great. Bear in mind I had an existing Excel file where this button was ALWAYS disabled. I had to copy-and-paste the data out of the file and save it into a new file to get the "Reading Layout" button to enable. It then worked fine.
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.🙂
This comment was minimized by the moderator on the site
se eu compra a licença consigo instalar mais de uma vez no pc ou só serve uma vez ?
This comment was minimized by the moderator on the site
This solved one of my biggest headaches. I have one program that outputs a report that when exported to Excell it creates 200 worksheets! I have never been able to use it until now. Merging all of them into one worksheet only takes a few minutes with Kutools.
This comment was minimized by the moderator on the site
Thanks A lot of this product, mainly its use for reading layout & shortcuts of left side menu
This comment was minimized by the moderator on the site
My OS: Windows 7 Pro fully updated My Excel: 2010 My sheet: Range R1C6:R504C6 is in use PROBLEM: READING LAYOUT FAILS TO FILL ROW AND COLUMN SELECTED 1. Magnification: 60% 2. Rows 313-355 show 3. Cell R354:C6 selected 4. Column 5 fills to row 323. Row 354 no fill 5. Mag to 50% 6. Rows 311-357 show 7. Column 5 fills top to bottom. Row 354 fills left to right 8. Mag to 60%. Goto 4. 9. Mag to 70%. 10. Rows 319-354 show 11. Column 6 fills to row 325. Row 354 is empty. 12. Click R354:C6 13. No change! 14. WHY? NOTE: At 60% magnification selecting any cell on visible sheet on rows greater than 323 demonstrates same problem. Selecting row 323 or lower i.e R320 the function works as expected with row and column selected but only to row 323!
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations