Přejít k hlavnímu obsahu

Jak získat výzvu nebo potvrzení před odesláním e-mailů v aplikaci Outlook?

Autor: Siluvia Naposledy změněno: 2020-07-08

Mnohokrát jste odeslali e-mail a uvědomili jste si, že vám chybí něco důležitého nebo se v e-mailu o několik sekund objeví něco špatného. Jak se vyhnout odesílání trapných e-mailů v Outlooku? Ve skutečnosti můžete znovu potvrdit odeslání e-mailu po stisknutí tlačítka Odeslat v aplikaci Outlook. Metoda v tomto článku vám pomůže problém ukázat.

Před odesláním e-mailů s kódem VBA si vyžádejte výzvu nebo potvrzení


Před odesláním e-mailů s kódem VBA si vyžádejte výzvu nebo potvrzení

Následující kód VBA vám pomůže znovu potvrdit odeslání e-mailu po stisknutí tlačítka Odeslat v aplikaci Outlook. Postupujte prosím následovně.

1. zmáčkni Další + F11 klávesy pro otevření Microsoft Visual Basic pro aplikace okno.

2. V Microsoft Visual Basic pro aplikace Okno, poklepáním otevřete ThisOutlookSession okno kódu a poté zkopírujte níže uvedený kód VBA do okna kódu.

Kód VBA: Získejte potvrzení před odesláním e-mailů v aplikaci Outlook

Private Sub Application_ItemSend(ByVal Item As Object, Cancel As Boolean)
Dim xPrompt As String
Dim xOkOrCancel As Integer
On Error Resume Next
xPrompt = "Do you want to continue sending the email?"
xOkOrCancel = MsgBox(xPrompt, vbOKCancel)
If xOkOrCancel <> vbOK Then
    Cancel = True
End If
End Sub

3. zmáčkni Další + Q klávesy pro zavření Microsoft Visual Basic pro aplikace okno.

Od této chvíle, když stisknete Poslat Chcete-li odeslat e-mail v aplikaci Outlook, zobrazí se potvrzovací dialogové okno, jak je znázorněno na obrázku níže. Klikněte OK pro odeslání tohoto e-mailu klikněte Zrušit abyste mohli pokračovat v psaní e-mailu.

Nejlepší nástroje pro produktivitu v kanceláři

🤖 Kutools AI asistent: Revoluční analýza dat založená na: Inteligentní provedení   |  Generovat kód  |  Vytvořte vlastní vzorce  |  Analyzujte data a generujte grafy  |  Vyvolejte funkce Kutools...
Populární funkce: Najít, zvýraznit nebo identifikovat duplikáty   |  Odstranit prázdné řádky   |  Kombinujte sloupce nebo buňky bez ztráty dat   |   Kolo bez vzorce ...
Super vyhledávání: Více kritérií VLookup    VLookup s více hodnotami  |   VLookup na více listech   |   Fuzzy vyhledávání ....
Pokročilý rozevírací seznam: Rychle vytvořte rozevírací seznam   |  Závislý rozbalovací seznam   |  Vícenásobný výběr rozevíracího seznamu ....
Správce sloupců: Přidejte konkrétní počet sloupců  |  Přesunout sloupce  |  Přepnout stav viditelnosti skrytých sloupců  |  Porovnejte rozsahy a sloupce ...
Doporučené funkce: Zaměření mřížky   |  Návrhové zobrazení   |   Velký Formula Bar    Správce sešitů a listů   |  Knihovna zdrojů (Automatický text)   |  Výběr data   |  Zkombinujte pracovní listy   |  Šifrovat/dešifrovat buňky    Odesílat e-maily podle seznamu   |  Super filtr   |   Speciální filtr (filtr tučné/kurzíva/přeškrtnuté...) ...
Top 15 sad nástrojů12 Text Tools (doplnit text, Odebrat znaky, ...)   |   50+ Graf Typ nemovitosti (Ganttův diagram, ...)   |   40+ Praktické Vzorce (Vypočítejte věk na základě narozenin, ...)   |   19 Vložení Tools (Vložte QR kód, Vložit obrázek z cesty, ...)   |   12 Konverze Tools (Čísla na slova, Přepočet měny, ...)   |   7 Sloučit a rozdělit Tools (Pokročilé kombinování řádků, Rozdělit buňky, ...)   |   ... a více

Rozšiřte své dovednosti Excel pomocí Kutools pro Excel a zažijte efektivitu jako nikdy předtím. Kutools for Excel nabízí více než 300 pokročilých funkcí pro zvýšení produktivity a úsporu času.  Kliknutím sem získáte funkci, kterou nejvíce potřebujete...

Popis


Office Tab přináší do Office rozhraní s kartami a usnadňuje vám práci

  • Povolte úpravy a čtení na kartách ve Wordu, Excelu, PowerPointu, Publisher, Access, Visio a Project.
  • Otevřete a vytvořte více dokumentů na nových kartách ve stejném okně, nikoli v nových oknech.
  • Zvyšuje vaši produktivitu o 50%a snižuje stovky kliknutí myší každý den!
Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Clicking on cancel , sends the message
This comment was minimized by the moderator on the site
Hi, I get an error message when I run this VBA code.The error is "Compile error: Sub or function not defined."
This comment was minimized by the moderator on the site
Hi the code is giving me an error saying "Compile error: Sub or Function not defined."What would be the cause for this?
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
The solution worked for me once but I couldn't get it to work for me again. Any suggestions how to do that?
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
This worked one time, after tha never worked again.
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
Hi There,

For some reason, mine, it works well only for one day. The codes don't seem to work anymore the next day, although those codes remained intact,

Anyone has such experience and know why?

Thanks.
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
Seeing same issue, any desired solution?
This comment was minimized by the moderator on the site
Same issue, it doesn't work for next day or after relaunching outlook, any solution?
This comment was minimized by the moderator on the site
Hi, i've got the same experience. Not sure yet how to solve this, i'm very new to VBA.
Would like to hear from you if you found a fix.
This comment was minimized by the moderator on the site
Hello! Very useful and it works perfectly.

Is it possible to adjust the code so that it only pops up when there is an attachment? Similarly, is it possible to adjust it so it prompts the pop-up only when the message is sent externally (not to people of the company)?
This comment was minimized by the moderator on the site
Hi There

Is it possible to get a message to come up only when an attachment is present, and only when sent externally?

Thank you very much!

Daniel
This comment was minimized by the moderator on the site
If you want the pop-up to only happen when you send to several emails, i.e. >10, how do you do that?

Oh and thanks, it works like a treat.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations